Grinding, Deburring, Polishing, Wet Painting, Powder Painting & Plating
Segregated Clean Up Room
Equipped with Dust Collection System
2 - Stroke Sanders
1 - Patriot II Twin Head Deburring & Finishing
1 - Grinding & Polishing Lathe
1 - Polishing Lathe.
800 ft. Conveyorized Paint Line
5 Stage Iron Phosphate In-Line Parts Cleaner
2 - Wet Spray Booths
Nordson In-Line Powder Booth
Off-Line I Batch Facility
Batch Spray Booth
Powder Equipped Electrostatic Spray Gun
Steam Jenny Wash Booth
Large Roll-In Batch Oven
Large Explosion Proof Paint Storage Room
Metal surfaces have an appeal of their own that few other materials can compare to but it is no match for the environment without proper surface treatment. Since Nelson is a turn-key operation; finishing is an important part of our manufacturing process. Finish quality is the first impression that everyone sees and maybe the most critical part of what makes architectural metals so attractive.
For Products that require a wet paint or powder coating, a five-stage washing system is used to remove any residual oils and properly prepare the surface for maximum coating adhesion. With large batch painting and powder coating booths and a 10 ton overhead crane, even very large coatings and fabrications can be accommodated.
Our assembly capabilities include mechanical pneumatic, and electromechanical assembly of products for the architectural institutional construction, medical and transportation industries. If full assembly is nor desired, parts can be kitted for added convenience and expedited processing at the customer's facility. With a broad customer base and a wide range of fabrication capabilities, we are able to provide any level of service desired, all of which are backed by our ISO 9001:2015 certified quality management system.
For additional information about our custom finishing and assembly services, see the table below, or contact us directly.
Nelson’s Architectural Metals Division uses the RAL Universal Color System as the color guide for standard project colors.
We also have the ability to match any existing color or create a specific color when needed for project color matching.
Finishes also come in a variety of surface treatments.
Colors should never be chosen from monitor displays, only from official RAL Swatch samples. RAL samples can be supplied by Nelson when the critical decisions are made.
RAL 1000 |
RAL 1001 |
RAL 1002 |
RAL 1003 |
RAL 1004 |
RAL 1005 |
RAL 1006 |
RAL 1007 |
RAL 1011 |
RAL 1012 |
RAL 1013 |
RAL 1014 |
RAL 1015 |
RAL 1016 |
RAL 1017 |
RAL 1018 |
RAL 1019 |
RAL 1020 |
RAL 1021 |
RAL 1023 |
RAL 1024 |
RAL 1026 |
RAL 1027 |
RAL 1028 |
RAL 1032 |
RAL 1033 |
RAL 1034 |
RAL 1035 |
RAL 1036 |
RAL 1037 |
RAL 2000 |
RAL 2001 |
RAL 2002 |
RAL 2003 |
RAL 2004 |
RAL 2005 |
RAL 2008 |
RAL 2009 |
RAL 2010 |
RAL 2011 |
RAL 2012 |
RAL 2013 |
RAL 3000 |
RAL 3001 |
RAL 3002 |
RAL 3003 |
RAL 3004 |
RAL 3005 |
RAL 3007 |
RAL 3009 |
RAL 3011 |
RAL 3012 |
RAL 3013 |
RAL 3014 |
RAL 3015 |
RAL 3016 |
RAL 3017 |
RAL 3018 |
RAL 3020 |
RAL 3022 |
RAL 3024 |
RAL 3026 |
RAL 3027 |
RAL 3028 |
RAL 3031 |
RAL 3033 |
RAL 4001 |
RAL 4002 |
RAL 4003 |
RAL 4004 |
RAL 4005 |
RAL 4006 |
RAL 4007 |
RAL 4008 |
RAL 4009 |
RAL 4010 |
RAL 4011 |
RAL 4012 |
RAL 5000 |
RAL 5001 |
RAL 5002 |
RAL 5003 |
RAL 5004 |
RAL 5005 |
RAL 5007 |
RAL 5008 |
RAL 5009 |
RAL 5010 |
RAL 5011 |
RAL 5012 |
RAL 5013 |
RAL 5014 |
RAL 5015 |
RAL 5017 |
RAL 5018 |
RAL 5019 |
RAL 5020 |
RAL 5021 |
RAL 5022 |
RAL 5023 |
RAL 5024 |
RAL 5025 |
RAL 5026 |
RAL 6000 |
RAL 6001 |
RAL 6002 |
RAL 6003 |
RAL 6004 |
RAL 6005 |
RAL 6006 |
RAL 6007 |
RAL 6009 |
RAL 6010 |
RAL 6011 |
RAL 5012 |
RAL 6013 |
RAL 6014 |
RAL 6015 |
RAL 6015 |
RAL 6017 |
RAL 6018 |
RAL 6019 |
RAL 6020 |
RAL 6021 |
RAL 6022 |
RAL 6024 |
RAL 6025 |
RAL 6026 |
RAL 6027 |
RAL 6028 |
RAL 6029 |
RAL 6032 |
RAL 6033 |
RAL 6034 |
RAL 6035 |
RAL 6036 |
RAL 6037 |
RAL 6038 |
RAL 7000 |
RAL 7001 |
RAL 7002 |
RAL 7003 |
RAL 7004 |
RAL 7005 |
RAL 7006 |
RAL 7008 |
RAL 7009 |
RAL 7010 |
RAL 7011 |
RAL 7012 |
RAL 7013 |
RAL 7015 |
RAL 7016 |
RAL 7021 |
RAL 7022 |
RAL 7023 |
RAL 7024 |
RAL 7026 |
RAL 7030 |
RAL 7031 |
RAL 7032 |
RAL 7033 |
RAL 7034 |
RAL 7035 |
RAL 7036 |
RAL 7037 |
RAL 7038 |
RAL 7039 |
RAL 7040 |
RAL 7042 |
RAL 7043 |
RAL 7044 |
RAL 7045 |
RAL 7046 |
RAL 7047 |
RAL 7048 |
RAL 8000 |
RAL 8001 |
RAL 8002 |
RAL 8003 |
RAL 8004 |
RAL 8007 |
RAL 8008 |
RAL 8011 |
RAL 8012 |
RAL 8014 |
RAL 8015 |
RAL 8016 |
RAL 8017 |
RAL 8019 |
RAL 8022 |
RAL 8023 |
RAL 8024 |
RAL 8025 |
RAL 8028 |
RAL 8029 |
RAL 9001 |
RAL 9002 |
RAL 9003 |
RAL 9004 |
RAL 9005 |
RAL 9007 |
RAL 9007 |
RAL 9010 |
RAL 9011 |
RAL 9016 |
RAL 9017 |
RAL 9018 |
RAL 9022 |
RAL 9023 |
Ourborite™ : DESIGNER SERIES : The Designer Series features high resolution color separations with deep gloss levels that provide a cost effective wood grain solution that competes with the aesthetics of more expensive patterns.
Category: Wood
Finish Code: DS-04HB
Species: Balsa
Grain: Straight Grain (S)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-01NB
Species: Birch
Grain: Straight/Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-07CC
Species: Cherry
Grain: Straight/Cathedral Grain (SC)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-02SM
Species: Maple
Grain: Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-06VO
Species: Oak
Grain: Straight/Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-03UO
Species: Paldao
Grain: Straight/Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-05TT
Species: Teak
Grain: Straight Grain (S)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: DS-08BW
Species: Walnut
Grain: Straight/Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Stone/Sand/Stucco
Finish Code: DS-09TA
Species:
Grain: Straight Grain (S)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Fabric
Finish Code: DS-10AL
Species:
Grain: Crosshatch (CH)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Metallic
Finish Code: ON-509211
Species:
Grain: Peened (P)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Metallic
Finish Code: ON-510044
Species:
Grain: Linear (L)
Repeat Type: 1/2 Step
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Ourborite™ : SUPREME 3D SERIES : The Supreme 3d Series features an embossed grain finish as our most realistic reproduction of wood grains and color representing the natural look and warmth of wood.
Category: Wood
Finish Code: UGW-213
Species: Sycamore
Grain: Straight Grain (S)
Repeat Type: 1/2 Step
Repeat Height: 970 mm
Repeat Width: 590 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: UGW-786
Species: Maple
Grain: Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: 1340 mm
Repeat Width: 525 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Super Real Wood
Finish Code: SW-27
Species: Cherry
Grain: Cathedral Grain (C)
Repeat Type: Box
Repeat Height: 970 mm
Repeat Width: 415 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Super Real Wood
Finish Code: UGSW45
Species: Walnut
Grain: Straight Grain (S)
Repeat Type: Box
Repeat Height: 810 mm
Repeat Width: 410 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: UGW92A
Species: Cedar
Grain: Straight Grain (S)
Repeat Type: Box
Repeat Height: mm
Repeat Width: mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Exterior Direct Sunlight - Wood
Finish Code: UGEW1201
Species: Oak
Grain: Catherdral Grain (IC)
Repeat Type: 1/2 Step
Repeat Height: 970 mm
Repeat Width: 4150 mm
Colorfastness: 10 years colorfast under direct sunlight
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: UGWB404
Species: Oak
Grain: Catherdral Grain (IC)
Repeat Type: 1/2 Step
Repeat Height: 970 mm
Repeat Width: 525 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Super Real Wood
Finish Code: UGSW24
Species: Walnut
Grain: Cathedral Grain (C)
Repeat Type: 1/2 Step
Repeat Height: 970 mm
Repeat Width: 410 mm
Colorfastness: 3 to 5 years colorfast under direct sunlight
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Category: Wood
Finish Code: UGW633
Species: Hinoki
Grain: Straight Grain (S)
Repeat Type: 1/2 Step
Repeat Height: 945 mm
Repeat Width: 630 mm
Colorfastness: Interior and shrouded exterior use only
Please note that due to differences in monitor calibration, displayed colors may vary slightly from actual sample colors.
Sample swatches shown are a small selection of the popular finishes available.
A full range of colors and grains are available upon request.
For more information on how Ourborite™ can be applied to your architectural project, or for samples, contact your local Nelson Sales Representative or call our office at 1-800-277-6897
Nelson Architectural Metals Division designs, engineers and fabricates architectural metal products for virtually any commercial or institutional application. This includes decorative metal Wall panels and expanded metal Ceiling Panels (including Medium Security Ceiling system), metal Column Covers and beam wraps and unique custom architectural furnishings – all offered in painted steel, stainless steel or aluminum. Our extensive portfolio of projects includes customized installations at transit facilities, stadiums, airport terminals, universities, commercial buildings and many other applications throughout Canada and the United States. Our Custom Architectural metal fabrication team is the partner you can rely on.
CLICK TO SUBMIT