Skip to main content

NUVO Baffles Panel-TSP

NUVO Baffles Panel-TSP

Features: Pre-Assembled, Panelized Baffles

  • Engineered to suit specific location requirements
  • Multiple baffle widths, depths and spacings available
  • Available as both acoustical and non-acoustical assemblies
  • Multiple perforation and acoustical insulating options
  • Reduced installation labor time on-site
  • Factory assembled precision and Quality Control
  • Materials
    Aluminum: 3003-H14 alloy suitable for paint or Ourborite™, a faux wood finish, or 5005-H14 alloy, used with anodized finishes. Typical standard thickness 20 Ga. (.032” / 0.8 mm)
  • Finishes
    Aluminum: Baked polyester powder or two or three coat fluoropolymer coatings by PPG® or Valspar®, Ourborite™ faux wood veneer. Also Class I or II anodic finishes.
  • Dimensions

    Standard Baffle cross sections are 2” x 4” and 2” x 6” (w x h). Other sized available based on tooling.
    Standard maximum size panel is 30" x 96". For larger sizes please contact your Nelson AMD Representative.

  • Designs

    Baffle Panels attach to a 1.5" tbar grid using standard or heavy duty torsion springs

  • Acoustics

    Metal Baffles are available both non-perforated (non-acoustic) and perforated (acoustic). Perforation patterns are limited only to the type of material and gauge chosen. Presently Nelson offers more than fifty different perforation patterns ranging from diagonal, staggered to straight as well as round, square and oblong holes.

    Multiple sound-absorbing material options available including Black pre-laminated fleece (SoundTex®) bonded to the inside surfaces of the baffles, Loose-fill batt insulation and glass fiber mats.

    For more details and options contact your local Nelson Sales Representative or call our office at
    1-800-277-6897

  • Standard References

    A. ASTM E84 - Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.

    B. AAMA 605.2 - Specification for High Performance Finishes.

    C. ASTM A 366/A 366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled; 1997.

    D. ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; 2000.

    E. ASTM B36/B 36M Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar; 2006.

    F. ASTM B 209/B 209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; 2004.