Skip to main content

NUVO Accents, Grilles & Screens (Metal)

NUVO Accents

NUVO Accents, Grilles & Screens Datasheet
Halifax Moon Close-up
Halifax Moon Close-up
Halifax Moon Pattern
Halifax Moon Pattern
  • Materials

    Aluminum Sheet: 3003-H14 alloy (Standard), or 5005-H34 alloy (For use with anodized finishes). Typical minimum thickness 14 Ga. (.063” / 1.6 mm)

    Stainless Steel Sheet: Type 304 (Standard) or 316 (For higher degree of corrosion resistance). Typical minimum gauge 22 Ga. (.031” / 0.8 mm)

    Bronze Sheet: Muntz metal alloy 280 or Commercial Bronze alloy 220. Typical minimum thickness (.032” / 0.8 mm)

    Galvanized Steel Sheet: Galvanneal Satin Coat, Typical minimum thickness 24 Ga.(.028” / 0.7 mm)

  • Finishes

    Aluminum: Baked polyester powder, or two or three coat fluoropolymer coatings by PPG® or Valspar®. Class I or II anodic finishes.
  • Dimensions

    Metal Accents are typically supplied in any width and length suitable for shipping and handling.
  • Equipment

    (Accent product related, a full list is available on request) Amada LCG 3015 AJ Fiber Laser RAS Multibend-Center 79.26-2
  • Standard References

    A. ASTM E84 - Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.

    B. AAMA 605.2 - Specification for High Performance Finishes.

    C. ASTM A 366/A 366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled; 1997.

    D. ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; 2000.

    E. ASTM B36/B 36M Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar; 2006.

    F. ASTM B 209/B 209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; 2004.

NUVO Accents, Grilles & Screens (Metal) Example