Skip to main content

NUVO Guard ( Secured Access )

NUVO Guard

NUVO Guard Sample Sheet
NUVO Guard ( Secured Access )
NUVO Guard ( Secured Access )
NUVO Guard ( Secured Access )
NUVO Guard ( Secured Access )
  • Materials

    Aluminum Sheet: 3003-H14 alloy (Standard) or 5005-H34 alloy (For use with anodized finishes).
    Typical minimum thickness 20 Ga. (.032” / 0.8 mm)

    Stainless Steel Sheet: Type 304 (Standard) or 316 (For higher degree of corrosion resistance). Minimum gauge 22 Ga. (.031” / 0.8 mm)

    Galvanized Steel Sheet: Galvanneal Satin Coat, Typical minimum 24 Ga.(.028” / 0.7 mm)
  • Finishes

    Aluminum: Baked polyester powder or two or three coat fluoropolymer coatings by PPG® or Valspar®.
    Class I or II anodic finishes.

    Stainless Steel: Satin brush # 4, Mirror # 8 or other readily available finishes for example, Non-Directional Brush or Random Swirl.

    Galvanized Steel Sheet: Baked polyester powder.
  • Dimensions

    Metal Ceiling Panels are typically supplied up to a maximum of 16 square feet, for example 2’ x 8’ or 4’ x 4’ .
  • Acoustics

    Metal Ceilings are available both non-perforated (non-acoustic) and perforated (acoustic). Perforation patterns are limited only to the type of material and gauge chosen and available tooling. Presently Nelson offers more than fifty different perforation patterns ranging from diagonal (45-degree), staggered (60-degree) to straight as well as round, square and oblong holes.

    Our standard acoustical material consists of a Black pre-laminated fleece (SoundTex®) bonded to the concealed face of the ceiling panel.
  • Standard References

    A. ASTM E84 - Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.

    B. AAMA 605.2 - Specification for High Performance Finishes.

    C. ASTM A 366/A 366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled; 1997.

    D. ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; 2000.

    E. ASTM B36/B 36M Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar; 2006.

    F. ASTM B 209/B 209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; 2004.


NUVO Guard ( Secured Access )