Skip to main content

NUVO Hex Panel TSP (Metal)

NUVO Hex Panel TSP

NUVO Hex Panel TSP
NUVO Hex Panel TSP
NUVO Hex Panel TSP
  • Materials

    Surface Face:Aluminum Sheet: 3003-H14 alloy. Typical standard thickness 20 Ga. (.032” / 0.8 mm) HoneyComb Backer: 3000 Series Aluminum Foil Cell Sizes: 1/4” - 1.0” Densities: 1.2 pcf - 5.2 pcf Sheet “Ribbon” (L): 48” typical - 72” max Sheet “Transverse” (W): 96” typical - 200” max Sheet Thickness (T): 35” max
  • Finishes

    Aluminum: Baked polyester powder, or two or three coat fluoropolymer coatings by PPG® or Valspar®.
  • Dimensions

    Metal Ceiling Panels are commonly supplied up to a maximum of 16 square feet, for example 2’ x 8’ or 4’ x 4’. However larger sizes are available upon request and following analysis.
  • Designs

    Nelson offers a complete line of lay-in, clip-on (Torsion Spring), hook-on and tab-and-slot type systems.
  • Benefits

    Aluminum Honeycomb core-backed ceiling and wall panels offer superior rigidity and uniformity of finished form in larger sheet sections when compared to traditional metal panels.
  • Standard References

    A. ASTM E84 - Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.

    B. AAMA 605.2 - Specification for High Performance Finishes.

    C. ASTM A 366/A 366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled; 1997.

    D. ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; 2000.

    E. ASTM B36/B 36M Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar; 2006.

    F. ASTM B 209/B 209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; 2004.