NUVO Accents
-
Materials
Aluminum Sheet: 3003-H14 alloy (Standard), or 5005-H34 alloy (For use with anodized finishes).
Typical minimum thickness 14 Ga. (.063” / 1.6 mm)Stainless Steel Sheet: Type 304 (Standard) or 316 (For higher degree of corrosion resistance).
Typical minimum gauge 22 Ga. (.031” / 0.8 mm)Bronze Sheet: Muntz metal alloy 280 or Commercial Bronze alloy 220.
Typical minimum thickness (.032” / 0.8 mm)Galvanized Steel Sheet: Galvanneal Satin Coat,
Typical minimum thickness 24 Ga.(.028” / 0.7 mm) -
Finishes
Aluminum: Baked polyester powder, or two or three coat fluoropolymer coatings by PPG® or Valspar®.
Class I or II anodic finishes.Stainless Steel: Satin brush # 4, Mirror # 8 or other readily available finishes for example,
Non-Directional Brush or Random Swirl.Galvanized Steel Sheet: Baked polyester powder
-
Dimensions
Metal Accents are typically supplied in any width and length suitable for shipping and handling.
-
Equipment
(Accent product related, a full list is available on request)
Amada LCG 3015 AJ Fiber Laser
RAS Multibend-Center 79.26-2 -
Standard References
A. ASTM E84 - Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.
B. AAMA 605.2 - Specification for High Performance Finishes.
C. ASTM A 366/A 366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled; 1997.
D. ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; 2000.
E. ASTM B36/B 36M Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar; 2006.
F. ASTM B 209/B 209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; 2004.
